FREE - Paper Model Tables For Your RPG!

(click to embiggen)

Recently my gaming group was nearing an alchemist lab I had placed in a wizards tower so I needed some tables and alchemist gear to give the idea of a sinister laboratory.  I wanted a basic design and came up with more or less a couple of "boxes", so they are easy to build, and you can knock out a bunch in a sitting or two. Downloads for both a clean set and a grunged up set after the jump...



Here are the dimensions, 1 in. x 2 in. x 1/4 in. thick top portion which sit upon two block 1/2 x 1/2  x 1/2 cubes that get inserted into the table top so that table top is 1/2 in. in height.  If you want a taller table just don't cut out the support sections squares (marked black) and glue the supports directly to the table top bottom which will give you an additional height factor.


I also created some of the laboratory equipment to go on top of the tables and used a transparency sheet for a see through effect.  So be sure to check back as I'll post that on Wed or Friday.


Just print on some 110 card stock and use either normal or hot glue to assemble, then edge the score lines/folds with some brown, terra cotta or black colored markers and you've got a nice set of tables to use for a wizards laboratory, tavern, cartographer's office or any such place where you might need some clean or mis used long tables. (Click on the images below to embiggen or right click to save as)

Clean Set

Grunge Set

Hope you enjoyed this post and thanks for stopping by!